Go back to previous list...

STORM: Marine Moorings Masterclass

When:
January 26, 2018 @ 9:30 am – 5:30 pm
Where:
Brunel University
Kingston Ln
Uxbridge UB8 3PN
UK
Cost:
Free
Contact:
Lisa MacKenzie+44(0)1856 852060E-mail

STORM logo

Marine Moorings Masterclass

Seminar | Workshop | Networking

Sharing knowledge on offshore moorings challenges and solutions

The challenge

Mooring systems are critical for the success of all offshore floating renewable energy devices, which are constantly pushed to their extreme limits in high energy environments. Over the last few years, there has been significant research focused on ropes resulting in the production of lighter and stronger products. As a consequence, the weaknesses in the systems now occur in the rope in-line and end connectors with critical areas causing chaffing of the rope, resulting in premature failure.

The potential

Moorings offer a number of advantages of marine energy deployments:

  • Simpler and quicker deployments
  • Enables deeper water deployments
  • Reduce LCOE as smaller vessels can be used

STORM project

Funded by Innovate UK, the STORM (Specialised Thimbles for Offshore Renewable Marine energy) project is aiming to design a new multi-material hybrid connector which will be:

  • Lighter
  • Easier to assemble
  • Enhance the lifespan of mooring systems

The innovation uses the next generation of nylon/AI composite materials which, when combined, exhibit higher strength, high corrosion resistance, low coefficient of friction, and are lightweight. For offshore renewable energy devices, this will result in increased deployability, increased reliability, and longer in-service times. This will yield an increase in energy output and improvement in safety, whilst reducing failures and offshore maintenance operations which will ultimately help reduce the LCOE for the industry.

Marine Moorings Masterclass

Within the scope of the STORM project, an end-of-project dissemination event is required to share the progress made within the STORM project. However, rather than simply focus on what we have done, we want to bring together moorings experts, offshore energy developers and supply chain companies to share common challenges and learning around marine mooring applications and experiences, and discuss the progress in developing, testing and operating solutions for this vital marine energy subsystem. As ocean energy is a new developing pre-commercial industry, with limited hours in the water relative to other more mature industries, the workshop aims to share knowledge from other industries (particularly oil & gas and offshore wind) to see where the ocean energy sector can gain for previous lessons learned to streamline the development of the sector, reducing the burden on developers to tackle these issues in isolation. By working together, and reducing duplication of effort on developing moorings solutions, marine energy developers can focus on the most vital aspect of marine energy technology development aiding there move towards commercialisation.

Masterclass objective

The workshop aims to bring together representatives from offshore wind, wave and tidal energy to share learning and facilitate knowledge sharing on offshore moorings, focusing on the challenges, needs and solutions of the sector. The workshop will look to identify industry needs and corresponding R&D projects around moorings, encouraging new project partnerships to form.

Register now

This event is free to attend, and lunch will be provided. However registration is essential.

To register for this event, please email lisa.mackenzie@emec.org.uk by Friday 12th January 2018.

Masterclass programme

The programme as at 17/1/18 is presented below. Check back for updates. If you would like to provide a presentation within the programme, please contact Lisa MacKenzie: lisa.mackenzie@emec.org.uk | +44(0)1856 852207

 0930 Arrival & registration
Coffee & networking
 0950 Welcome & overview
Introduce ‘Marine Moorings Matrix’ Nigel Briggs | TTI
STORM Project Manager
 1000 STORM connector and project outcomes
Connector design Nigel Briggs | TTI
Connector reinforcement & casting process Brian McKay | Brunel University
Material integration and testing Damien McCormack | Nylacast
Demonstration of new mooring connector Nigel Briggs | TTI
 1030 Lessons learned: Challenges and progress in ocean energy moorings
Speed updates: Marine energy developers & supply chain
LAMWEC mooring design & strop testing Steven Nauwelaerts | Laminaria
Rotary Wave marine moorings experience Andrea Novás Cortés | Rotary Wave
Raptor rock anchoring for marine moorings Nick Cresswell | SME
Marine installations in the wave and tidal energy sector Myles Metson | Green Marine
Q&A
 1200 Brunel University tour
Visit of AMCC & ETC facilities
 1300 Networking lunch
Update Marine Moorings Matrix
 1345 Lessons learned from other sectors
Speed updates
Top end tensioner Stephen Banfield | TTI
Moorings reliability testing Andy Shanks | EMEC
WES Landscaping Study: Moorings and foundations Ben Yeats & Tom MacKay | TTI Marine Renewables
Aquaculture moorings experience Lawrie Stove | Aquamoor
Offshore wind / O&G lessons learned TBC
Q&A
 1500 Break-out groups
Discussions points:

  • Existing products and those in development
  • Identify challenges/gaps/needs in mooring R&D and experience
  • Apply learning from different sectors to overcome mooring challenges
  • Identify future areas for Innovation UK calls/proposals.
 1600 Marine Moorings Matrix
Discussion points:

  • Key challenges identified
  • Key solutions identified
  • Next steps
Presentation on possible funding opportunities Rachel Birch | Brunel University
Feedback, conclusions and actions
 1700 Workshop close

-

EMEC CLIENTS

Alstom

Alstom

hammerfest

hammerfest

Aquamarine

Aquamarine Power

atlantis

Atlantis Resources Corporation

bluewater

Bluewater

Nautricity

Nautricity

openhydro

Open Hydro

pelamis

pleamis

scotrenewables

Scotrenewables

scottish_power

ScottishPower Renewables

seatricity

Seatricity

Sustainable Marine Energy

Sustainable Marine Energy

voith

Voith Hydro

Wello

Wello Oy

Supported by: